Pacific DP100-D5 Plus Distro-Plate with Pump Combo Pacific DP100-D5 Plus Distro-Plate with Pump Combo Pacific DP100-D5 Plus Distro-Plate with Pump Combo Pacific DP100-D5 Plus Distro-Plate with Pump Combo Pacific DP100-D5 Plus Distro-Plate with Pump Combo Pacific DP100-D5 Plus Distro-Plate with Pump Combo
Pacific DP100-D5 Plus Distro-Plate with Pump Combo

Pacific DP100-D5 Plus Distro-Plate with Pump Combo

In stock
P/N
CL-W263-PL00SW-A
USD$229.99
The Pacific DP100-D5 Plus RGB liquid cooling Distribution plate and D5 pump combo that simplifies the tube structure of hard tubing water cooling and adds a smarter way for beginners and experienced modders to present their water-cooled builds.

Pacific DP100-D5 Plus

The Thermaltake Pacific DP100-D5 Plus is a distribution plate with a pre-installed D5 pump, the distro is universal and can be fitted to most 360mm radiator fan mounting points. Furthermore can be synced with our TT RGB PLUS Ecosystem.

 
Straightforward Installation
Compatible with multiple chassis, allowing universal fitment
Supports 360mm radiator mounting points
Requires a chassis that supports 2 or more 360mm radiators of space for installment
 
 
 
 

TT RGB PLUS Software

2.0 - New version of Thermaltake’s TT RGB PLUS patented software, providing more lighting effects and PC monitoring functions.
1.0 - Thermaltake’s patented software to synchronize TT RGB PLUS products with addressable LEDs.
Caution: TT RGB PLUS 2.0 and TT RGB PLUS 1.0 will overwrite one another; users can only install one version of TT RGB PLUS.

2.0 DOWNLOAD NOW 2.0 USER MANUAL
1.0 DOWNLOAD NOW LEARN MORE  

Sync with Razer Chroma Lighting

All Thermaltake TT RGB PLUS products are able to connect into the Razer Chroma ecosystem, Razer Synapse 3. Users can experience synchronized gaming and RGB lighting effects on their TT RGB PLUS liquid cooling system and Razer gaming gear!

LEARN MORE

Works with Amazon Alexa

All Thermaltake TT RGB PLUS products support Amazon Alexa Voice Service, allowing you to give voice commands to the Alexa-enabled devices.

LEARN MORE

TT AI Voice Control

Give you full control over the TT RGB PLUS products with your voice. “SyncALL, Say”Hello TT”.

Note: TT AI Voice control and Amazon Alexa requires the use of at least one TT RGB PLUS software-enabled product to function.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.

Category Caution
Chassis, ARGB Fan, ARGB AIO
  • The motherboard signal connector only supports a 5V header.
  • Make sure your motherboard software is the latest version.
RGB Memory, VGA Waterblock, Distro Plate
  • This product can only be used with either the TT RGB PLUS software or the dedicated Motherboard software. By having more than two applications open may cause conflicts
  • The motherboard signal connector only supports a 5V header.
  • Make sure your motherboard software is the latest version.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.
More Information
P/N CL-W263-PL00SW-A
Dimensions 360 (L) x 120 (W) x 84.8 (H)
INTERFACE USB 2.0 connectors (9 Pin)
System compatibility Windows 7 / 8 / 8.1 / 10
Power Input 37 W / 3.5 W
PUMP P1: 1,800 RPM
P2: 2,550 RPM
P3: 3,300 RPM
P4: 4,050 RPM
P5: 4,800 RPM
Connector 4 Pin
MATERIAL PMMA
Max Air Flow 1135 L/h
Max. Air Pressure 50 PSI
Rated Voltage 12 V / 5 V
CAPACITY 200 ml
Parts Stopper *4 (G 1/4 )
Screw thread G 1/4
US