Pacific PR12-D5 Plus Pacific PR12-D5 Plus Pacific PR12-D5 Plus Pacific PR12-D5 Plus Pacific PR12-D5 Plus Pacific PR12-D5 Plus
Pacific PR12-D5 Plus

Pacific PR12-D5 Plus

In stock
P/N
CL-W338-PL00SW-A
USD$189.99
The Pacific PR12-D5 Plus has newly designed mounting stands that ensures further stability while holding the 250 ml reservoir. The rotary cap design provides easy water loop options and delivers 16.8 million illumination of color and is supported by the TT RGB Plus Software.

Thermaltake

Pacific PR12-D5 Plus

360° Rotary Cap

The 360-degree rotary cap allows users to adjust the positions of the G 1/4 thread ports even after it mounts to the chassis, providing more flexibility during water-cooling builds.


Colorful Lighting

Shining through the rotary cap is 12 addressable LEDs allowing users to experience numerous lighting effects and 16.8 million color combinations through the TT RGB Plus software.

View the light show

Light Mode : Static

Release your creativity

Pacific PR12-D5 Plus is a 196.7 mm tall reservoir with a capacity of 250ml; not only is it suitable for small chassis, when placed in a large chassis, it releases extra space for more DIY styling, allowing users to get creative with this product!


Powerful Pump

The powerful pump head can push the coolant up to 15 feet high when set at its maximum speed, providing a flow rate of 1135 liters per hour. 5 Level Speed control allows users to manually control the pump's speed, switching the pump speed depending on the computer's load.

Multiple Installation Option

Besides the standard reservoir and pump stand, the package also includes a bracket that allows users to install the Pacific PR12-D5 Plus on a fan, allowing users to enjoy water cooling with any chassis.

TT RGB PLUS Software

2.0 - New version of Thermaltake’s TT RGB PLUS patented software, providing more lighting effects and PC monitoring functions.
1.0 - Thermaltake’s patented software to synchronize TT RGB PLUS products with addressable LEDs.
Caution: TT RGB PLUS 2.0 and TT RGB PLUS 1.0 will overwrite one another; users can only install one version of TT RGB PLUS.

2.0 DOWNLOAD NOW 2.0 USER MANUAL
1.0 DOWNLOAD NOW LEARN MORE  

Sync with Razer Chroma Lighting

All Thermaltake TT RGB PLUS products are able to connect into the Razer Chroma ecosystem, Razer Synapse 3. Users can experience synchronized gaming and RGB lighting effects on their TT RGB PLUS liquid cooling system and Razer gaming gear!

LEARN MORE

Works with Amazon Alexa

All Thermaltake TT RGB PLUS products support Amazon Alexa Voice Service, allowing you to give voice commands to the Alexa-enabled devices.

LEARN MORE

TT AI Voice Control

Give you full control over the TT RGB PLUS products with your voice. “SyncALL, Say”Hello TT”.

Note: TT AI Voice control and Amazon Alexa requires the use of at least one TT RGB PLUS software-enabled product to function.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.
More Information
P/N CL-W338-PL00SW-A
Dimensions 79 (L) x 79 (W) x 196.7 (H)
INTERFACE USB 2.0 Connectors(9 Pin)
System compatibility Windows 7 / 8 / 8.1 / 10
Fan Rated Voltage 1135 L/h
Power Input 37 W / 6.5 W
Connector 4 Pin
Pump Speed P1: 1,800 RPM
P2: 2,550 RPM
P3: 3,300 RPM
P4: 4,050 RPM
P5: 4,800 RPM
MATERIAL AL + POM + PMMA
CAPACITY 250 ml
Maximum head 15 feet (4.5m)
Maximum Flow Rate 1135 L/h
Maximum pressure 50 PSI
Input Voltage 12 V / 5 V
Parts 1. Stopper *1 (G 1/4 )
2. Bracket *1
3. Clip *1
Screw thread G 1/4

User Manual

  • File Name
  • Description
  • Size
  • Version
  • Release Date

Drivers & Software

  • File Name
  • Description
  • Size
  • Version
  • Release Date
  • TT RGB PLUS Software
  • 1.Support product DP-200 D5.
    2.Support RGB SYNC ARGENT H5 Headset.
    3.Optimized Player Mode.
    4.Minor bug fixes and system performance.
  • V 1.4.4
  • 2021-09-30
US