Water 3.0 Riing RGB 280 Water 3.0 Riing RGB 280 Water 3.0 Riing RGB 280 Water 3.0 Riing RGB 280 Water 3.0 Riing RGB 280 Water 3.0 Riing RGB 280 Water 3.0 Riing RGB 280
Water 3.0 Riing RGB 280

Water 3.0 Riing RGB 280

In stock
P/N
CL-W138-PL14SW-A
USD$134.99

All-in-one 280mm liquid cooler with dual patented Riing RGB high-static pressure fans and PWM function.

Thermaltake Water 3.0 Riing RGB 280

Designed to exceed enthusiast’s expectations, the Thermaltake Water 3.0 Riing RGB 280 comes with dual 140mm high-static pressure patented LED fans with a large surface radiator, high performance waterblock and pump for ultimate CPU cooling. The built-in Riing fan adopted PWM fan, compression blades and hydraulic bearings that guarantee superior cooling performance and quiet operation. One simple upgrade allows users to enjoy better cooling performance and greater CPU protection!

Tt LCS Certified

Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.

Riing 14 LED RGB Colors Radiator Fan

Featuring high-static pressure design, exceptional cooling performance and ultra-silent operation, the patented circular multicolored 140mm RGB fan utilized PWM fan, concentrated compression blade, hydraulic bearings, wind blocker frame and anti-vibration mounting system. Moreover, the built-in LED ring can maintain color and brightness uniformity. The lighting is visible from all sides and angles.

China Patent application : CN204498539U
US Patent application : 14/702,806

Smart Fan Controller

A self-contained fan controller can switch between 5 LED modes including solid colors of red, blue, white, green or disable and cycle through 256 colors. Play/Pause functions allow users to cycle colors (color remains unchanged even after the PC has been turned off or rebooted) with speed control options reduce noise even more all from your fingertips.

High Efficiency Radiator

Special designed 280mm large surface radiator not only doubles the cooling surface, but also supports up to 4 x 140mm fans for additional heat dissipation.

High Performance Waterblock and Durable Sleeved Cable

The high performance copper base plate accelerates the heat conductivity. The pre-refilled coolant reduces any stress from liquid replenishment hassle. Additionally, the reinforced sleeved cable delivers the best durability and prevents the tubing from any damages.

High Reliability Pump

The high quality and reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore no refill is either needed or required.

Simple Setup

Featuring the latest cooling performance, the self-contained design of the Thermaltake Water 3.0 Riing RGB Series provides an easy installation system and a totally maintenance-free operation, requiring only the minimum amount of space in the chassis.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.
More Information
P/N CL-W138-PL14SW-A
Weight 1181g
PUMP Rated Voltage : 12 V
Rated Current : 175 mA
WATER BLOCK Material : Copper
Fan Dimension :
140 x 140 x 25 mm
Speed :
800 ~ 1500 R.P.M (PWM)
400 ~ 1000 R.P.M (Low Noise Mode)
Noise Level :
18.5 ~ 26.4 dB-A
Rated Voltage :
12 V
Max. Air Flow :
22.14 ~ 40.6 CFM
Max. Pressure :
0.57 ~ 2.01 mm-H2O
Connector :
5 pin
Tube Length : 326 mm
Material : Braided Tube
Radiator Dimension : 313 x 139 x 27 mm
COMPATIBILITY Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150
AMD TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
*AIO Cooler bracket adapter comes in the AMD Threadripper CPU box.
US